Join Us

We offer a very exciting work environment, full of passion, team work and creativity. If there is no suitable position you are looking for, please send us your resume at . We will add your resume in our pool for any available position in the future.

Currently we dont have any position available. Please check back soon.



Past Positions

Job ID: eng-mems052020

Condition: full time, permanant

Start date: As soon as possible

About Us

Fourien Inc. is an Edmonton based startup where we develop microfluidic platforms for analytical measurements for life sciences. We develop micro electro mechanical systems (MEMS) sensors, instrumentation, mechanics and software for user interfaces. We are developing various technologies, which will be used to perform diagnostics on human samples. Our products need expertise from multiple disciplines. Currently, we are in a need of a cleanroom engineer who can take a responsibility to manufacture our MEMS/microsystems sensors. If you are experienced and passionate for MEMS, sensors, micro/nanotechnology, you should apply for this post.

Workplace environment

  • Flexible hours, you make your own schedule
  • Team work with scientists and researchers from different countries
  • Entrepreneurial environment
  • Work with nanotechnology, an exciting field of future
  • We give plenty of opportunity to learn new technologies

Requirements

  • Qualification: Masters or PhD degree in electrical engineering, engineering physics or a related field which can ensure sufficient knowledge and skills required by this position
  • Experience with MEMS layout design in LEdit, Cadence or KLayoutt
  • Experience with various cleanroom microfabrication tools and techniques such as photolithography, thin film deposition, wafer etching, CVD, PVD
  • Experience in COMSOL based MEMS designing and simulation would be an asset

Deadline

There is no specific deadline for this position. The applications would be reviewed as received. Therefore, apply sooner than later.

Apply

Please send a cover letter and a resume to

Job ID: eng-rf042020

Condition: full time

Contract length: one year

Start date: As soon as possible

About Us

Fourien Inc. is an Edmonton based startup where we develop microfluidics platforms for analytical measurements for life sciences. We develop MEMS sensors, instrumentation, mechanics and software for user interfaces. Currently, we are investing in R&D of a product which would be used to identify healthy and defected human cells in a tissue. The key components of the technology is non-invasive sensing based on radio waves. If you are passionate about RF engineering, microbiology, sensors and instrumentation, this position is for you. Being at a startup phase, we are flexible about many aspect of work but we do need an energetic an RF engineer who is willing to be a leader and take ownership in her/his role.

Workplace environment

  • Flexible hours, you make your own schedule
  • Team work with scientists and researchers from different countries
  • Entrepreneurial environment
  • Work with nanotechnology, an exciting field of future
  • We give plenty of opportunity to learn new technologies

Requirements

  • Qualification: Masters or PhD degree in electrical engineering, engineering physics or a related field which can ensure sufficient knowledge and skills required by this position
  • COMSOL modeling of RF antennas and microfluidics is a key requirement
  • Demonstrable knowledge in RF based bio sensing, antenna design and development of analogue circuits for RF generation
  • Hands on experience in operating and troubleshooting key RF instrumentation such as VNAs, high speed oscilloscopes, function generators, spectrum analyzers, etc
  • Experience in schematic development, PCB design and development with skills in troubleshooting
  • Experience in Python and C# based programming would be considered an important asset

Apply

Please send a cover letter and a resume to

Job ID: eng-ad052020

Condition: full time

Start date: As soon as possible

About Us

Fourien Inc. is an Edmonton based startup where we develop microfluidic platforms for analytical measurements for life sciences. We develop MEMS sensors, instrumentation, mechanics and software for user interfaces. We are developing various technologies which would be used to perform diagnostics on human samples. Our products need expertise from multiple disciplines. Currently, we are in a need of an analogue design engineer who can take care of our growing need of customized electronics for various instruments.

If you are experienced and passionate for product development, you should apply for this post.

Workplace environment

  • Flexible hours, you make your own schedule
  • Team work with scientists and researchers from different countries
  • Entrepreneurial environment
  • We give plenty of opportunity to learn new technologies

Requirements

  • Qualification: Masters or PhD degree in electrical engineering, engineering physics or a related field which can ensure sufficient knowledge and skills required by this position
  • Experience with design of low noise amplifiers and filters is highly desired
  • Experience with microcontroller programming is critical for this post
  • CAD Skills to design schematics and PCBs
  • PCB troubleshooting
  • Experience in schematic development, PCB design and development with skills in troubleshooting

Apply

Please send a cover letter and a resume to

Job ID: eng-soft052020

Condition: full time

Start date: June 15 2020

About Us

Fourien Inc. is an Edmonton based startup where we develop microfluidic platforms for analytical measurements for life sciences. We develop micro electro mechanical systems (MEMS) sensors, instrumentation, mechanics and software for user interfaces. We are developing various technologies, which will be used to perform diagnostics on human samples. Our products need expertise from multiple disciplines. Currently, we are in a need of a full stack develop who can take care of various software projects at the firm

If you are experienced and passionate for client oriented software solutions, this may be an opportunity for you.

Workplace environment

  • Flexible hours, you make your own schedule
  • Team work with scientists and researchers from different countries
  • Entrepreneurial environment
  • We give plenty of opportunity to learn new technologies

Requirements

  • Bachelors or Masters degree in a relevant discipline such as software engineering
  • Proficient in object oriented programming such as C#, C ++ or java with a good knowledge of its ecosystem
  • Experienced in app development in Android. iOS experience would be considered an asset
  • Experienced in developing software using Visual Studio
  • Identify bottlenecks and bugs, and devise solutions to these problems
  • Strong understanding of object-oriented programming
  • Skill for writing reusable libraries
  • Back-end/ Server-side object-oriented programming in a framework such as Django, etc
  • Satisfactory experience with front side frameworks such as bootstrap and JavaScript
  • Should be able to do basic tasks in front end using Bootstrap, Javascript, HTML, CSS, jQuery etc
  • Experience with databases, such as PostgreSQL, MySQL etc
  • Experienced in developing software using Git version control

Apply

Please send a cover letter and a resume to

Job ID: eng-tech052020

Condition: full time

Start date: June 15 2020

About Us

Fourien Inc. is an Edmonton based startup where we develop microfluidic platforms for analytical measurements for life sciences. We develop micro electro mechanical systems (MEMS) sensors, instrumentation, mechanics and software for user interfaces. We are developing various technologies, which will be used to perform diagnostics on human samples. Our products need expertise from multiple disciplines. Currently, are looking for a mechanical engineering technologist who can provide a fabrication support to other engineering staff.

If you are experienced and passionate CNC machines, assemblies, mechanics, etc, please send us your documents.

Workplace environment

  • Flexible hours, you make your own schedule
  • Team work with scientists and researchers from different countries
  • Entrepreneurial environment
  • We give plenty of opportunity to learn new technologies

Requirements

  • Qualification: diploma or bachelors in a relevant discipline such as mechanical engineering
  • Experience with mechanical designing in Solidworks would be a plus
  • Hands on shop experience would be beneficial in this post
  • Experience with CNC, lathe, milling would be highly useful

Apply

Please send a cover letter and a resume to